Moor Amps Angel 6 Dual Mono Power Amplifier


By using only top quality components and combining low-feedback design with high current delivery, this design will make you believe the music is being played ‘live in the room’. The Angel 6 can drive even the most demanding of Speakers to high levels, where other Amplifiers start to compress and sound strained.

What does this mean for your music?
  • An incredibly natural sound for instruments and vocals
  • Fine detail resolution and massive dynamic range
  • Awesome grip on timing and rhythm
  • An immersive, believable musical experience
What makes for the astonishing musical performance of the Angel 6?

Leaving no stone unturned in the search for musical perfection.

Moor Amps extend their low-feedback philosophy to the Power Supplies. The low-feedback Amplifier is fed with incredibly pure, high current DC rails from low-feedback regulators. More than 200,000uF of high quality, low ESR supply capacitors in 3 power islands isolate the circulating power supply currents and enhance the supply purity.

The heavy machined casing uses different panel thicknesses to damp each other out and avoid vibration reaching the Amplifier components. The highly linear output stage uses 6 ring-emitter transistors to share the current load and remain linear, even when supplying massive currents to keep a grip on the Speakers.

The Angel 6 combines the world of pure low-feedback with the high output currents needed to deliver the whole authentic musical performance. It delivers musicality and subtlety along with breathtaking power, scale and dynamics. It delivers Music!

Output Power:
  • 150W RMS per channel into 8 ohms
  • 300W RMS per channel into 4 ohms
  • 580W RMS dynamic into 2 ohms
Distortion (With Typical Loudspeaker Load):
  • THD: < 0.01%
  • IMD: < 0.01%
Loudspeaker Outputs:
  • Nominal: 4 ohms – 16 ohms
  • Minimum: 2 ohms
  • Connections WBT Classic: Wired, Spade or 4 mm plug
  • RCA (phono) inputs:
  • 1V rms for full output
  • Input Impedance 15k ohm
XLR (Balanced) Inputs:
  • +/- 1V rms for full output
  • Input Impedance 3k ohmx
Frequency Response:
  • 5Hz to 50kHz +/- 1dB
  • Short Circuit or Overload: +/-29A max
  • Overtemperature: +55C
  • Undertemperature: +5C
Mains Power:
  • IEC inlet cable for 230V AC 50Hz mains
  • Optional 115V AC 60Hz version available
Power Consumption:
  • Maximum 1300VA
  • Idle 80VA
  • Standby < 0.5W
Measurements – Amplifier (Unpackaged) Dimensions:
  • (WxDxH): 575 x 367 x 172 mm
  • Weight:  29 kg
Measurements – Amplifier (Packaged) Dimensions:
  • (WxDxH): 640 x 434 x 220 mm
  • Weight: 31 kg